CTEK MXS 25 Specifications download pdf

EN • 3

SAFETY

• The charger is designed for charging only

batteries according to the technical speciﬁca-

tion. Do not use the charger for any other

purpose. Always follow battery manufacturers

recommendations.

• Never try to charge non rechargeable batteries.

• Check the cables prior to use. Ensure that no

cracks have occurred in the cables or bend pro-

tection. A charger with damaged cables must

not be used. A damage cable must be replaced

by a CTEK representative.

• Never charge a damaged battery.

• Never charge a frozen battery.

• Never place the charger on top of the battery

when charging.

• Always provide for proper ventilation during

charging.

• Avoid covering the charger.

• A battery being charged could emit explosive

gases. Prevent sparks close to the battery.

• All batteries fail sooner or later. A battery that

fails during charging is normally taken care of

by the chargers advanced control, but some

rare errors in the battery could still exist. Don’t

leave any battery during charging unattended

for a longer period of time.

• Ensure that the cabling does not jam or comes

into contact with hot surfaces or sharp edges.

• Battery acid is corrosive. Rinse immediately with

water if acid comes into contact with skin or

eyes, seek immediate medical advice.

MANUAL

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger. This charger is

included in a series of professional chargers from CTEK SWEDEN AB and represents the

latest technology in battery charging.

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - CONGRATULATIONS

ENEN • 3SAFETY• The charger is designed for charging only batteries according to the technical speciﬁca-tion. Do not use the charger for any other pur

Page 2

4 • EN• Always check that the charger has switched to before leaving the charger unattended and connected for long periods. If the charger has not sw

Page 3 - HOW TO CHARGE

ENEN • 5SUPPLYNORMAL RECONDRECONDSUPPLYMODEABSORPTION, READY TO USEANALYSENORMAL BATTERYPROGRAMERROR LAMPRECOND PROGRAMSUPPLYPROGRAMPOWER LAMPHOW TO C

Page 4 - TO A BATTERY

6 • ENCHARGING PROGRAMS Settings are made by pressing the MODE-button. After about two seconds the charger activates the selected program. The selecte

Page 5 - POWER LAMP

ENEN • 7BATTERY SIZE (Ah)TIME TO 80% CHARGED40Ah1,5h100Ah3h200Ah6h300Ah16hREADY TO USEThe table shows the estimated time for empty battery to 80% char

Page 6 - CHARGING PROGRAM

8 • EN1VOLTAGE (V)CURRENT (A)ANALYSE RECOND PULSEDESULPHATION SOFT START BULK ABSORPTION14.4V 25A until 12.6V Increasing voltageto 14.4V @ 25°C25A 17L

Page 7 - LIMITED WARRANTY

ENEN • 9LIMITED WARRANTYCTEK SWEDEN AB, issues this limited warranty to the original purchaser of this product. This limited warranty is not transfera

Page 8 - 20015541E

10 • EN20015541E

Comments to this Manuals

No comments

CTEK MXS 25 Specifications

Browse online or download Specifications for Battery chargers CTEK MXS 25. Ctek MXS 25 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Battery chargers CTEK MXS 25