CTEK Multi XS 7000 User Manual download pdf (Page 12)

INDICATORS

SUPPLY

NORMAL

SUPPLY

RECOND

MODE

Indication Description

0 Error mode, the charger interrupts the charging/voltage supply. See description

below.

1 Start mode, restricted charging current and battery voltage under 10.5 V.

2 Bulk charging, Maximum charging current.

3 Absorption charging, Voltage restrictions to selected voltage.

4 Charging completed. Pulse maintenance charging.

5 Supply mode, ﬁxed output voltage, no counter voltage requirements.

6 Recond charging in progress, constant current 1.5 A.

A STANDBY - Power on no selection done,

B Mode 14.4 V - See battery types and settings.

C Mode 14.7 V - See battery types and settings.

D Mode 13.6 V / Supply - See battery types and settings.

E Mode 16 V / 1.5 A / 4 h Recond - See battery types and settings.

Error mode

The charger goes to error mode in the following situations:

1. Charging is started without a battery with terminal voltage over 1.5 V being con-

nected to the terminals.

2. The battery is connected with the battery´s terminals reversed to the charger's

terminals.

3. The terminals on the charger are short-circuited when charging has started.

4. The charger is overloaded in Supply mode.

5. The charger has been in start mode for more than 6 hours.

6. If the total time for bulk and absorption exceeds 40 hours.

Error mode is acknowledged/reset by pressing ”the MODE” button. The charger

restarts in the latest selected mode.

1 2 ... 7 8 9 10 11 12 13 14

No comments

CTEK Multi XS 7000 User Manual Page 12