Ctek MXS 5.0 CHECK User Manual download pdf

EN • 3

MODE

RECOND

BATTERY START POWER ALTERNATOR

VOLTAGE CHECK PROGRAM

MXS 5.0

CHECK BY

CONGRATULATIONS

on the purchase of your new professional switched mode battery charger and bat-

tery check instrument. This charger is included in a series of professional chargers from

CTEK SWEDEN AB and represents the latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M6

MODE

RECOND

BATTERY START POWER ALTERNATOR

VOLTAGE CHECK PROGRAM

MXS 5.0 CHECK BY

CTEK COMFORT CONNECT

MAINS CABLE

H05RN-F Rubber

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

H05RN–F Rubber

SUPPLY PLUG*

* Supply plugs may differ to suit your wall socket.

ERROR LAMP

FULLY CHARGEDREADY TO USE

POWER LAMP

HOW TO CHARGE

1. Connect the charger to the battery. Lamp 4, 5 and 6 now start ﬂickering indicating

VOLTAGE CHECK PROGRAM. Ignore this and continue with the next step.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery

or charger will not be damaged.

3.Press the MODE-button to select charging program.

4. Follow the 8-step display through the charging process.

The battery is ready to start the engine when STEP 4 is lit.

The battery is fully charged when STEP 7 is lit.

Stop charging at any time by disconnecting the mains cable from the wall socket.

Note: If the charger indicates START POWER VOLTAGE CHECK PROGRAM lamp

and BAD lamp press MODE-button for 2 sec to exit VOLTAGE CHECK PROGRAM.

MODE-BUTTON

MANUAL

HPN Rubber Cable

SMALL

BATTERY

PROGRAM

NORMAL

BATTERY

PROGRAM

COLD

WEATHER

OPTION

RECOND

OPTION

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - HOW TO CHARGE

EN • 3ENMODERECONDBATTERY START POWER ALTERNATORVOLTAGE CHECK PROGRAMMXS 5.0 CHECK BYCONGRATULATIONS on the purchase of your new professional switche

Page 2 - WITH SUPPLY PLUG CONNECTED

4 • ENHOW TO USE: VOLTAGE CHECK PROGRAM WITH SUPPLY PLUG CONNECTED1. Connect the charger to the battery.2. Connect the charger to the wall socket. The

Page 3 - BAD FAIR OK

EN • 5ENCHECK THE RESULT LAMPSIf the result lamp is lit:CHECK BATTERYCHECK START POWERBELOW 12.4V 12.4—12.6V ABOVE 12.6VBELOW 9.6V 9.6—10.5V ABOVE 10.

Page 4 - ERROR LAMP

6 • ENCHARGING STEPS STEP 1 DESULPHATIONDetects sulphated batteries. Pulsing current and voltage, removes sulphate from the lead plates of the battery

Page 5

EN • 7ENCHARGING PROGRAMS AND OPTIONS COMBINATIONSDESULPHATION SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT PULSECurrent (A) Voltage (V)15.8V 0

Page 6 - TECHNICAL SPECIFICATIONS

8 • ENTECHNICAL SPECIFICATIONSCharger modelMXS 5.0 CHECKModel number1066Rated Voltage AC220–240VAC, 50–60HzCharging voltage14.4V, 14.7V, 15.8VMin bat

Page 7 - LIMITED WARRANTY

EN • 9ENLIMITED WARRANTYCTEK SWEDEN AB, issues this limited warranty to the original purchaser of this product. This limited warranty is not transfera

Page 8 - Patents Designs Trade marks

10 • ENCTEK PRODUCTS ARE PROTECTED BY Patents Designs Trade marksEP10156636.2pending RCD 509617 CTM 669987US12/780968 pending US D575225 CTM844303EP